If
you have a Fender guitar or re-issue from the 1950's-60's or 70's, this is your
nut! A 7.25" radius, work with a curved or flat bottom and permanently
lubricated for great tuning stability. It works in both a flat bottom or
curved bottom nut slot due to its ingenious design, just sand off the tab for a
curved bottom.
It
is pre-slotted to make for a quick and easy install.
For just about all Fender electric guitars made in the 1950’s, 60’
and 70’s… that’s a lot!
The
7.25” fingerboard radius originated in the early 1950s and was used for most
Fender electric instruments until the 1980s. In the 80's it was changed to
a slightly flatter 9.5" radius.
TUSQ XL is
designed to boost guitar tone and performance. This precision engineered nut is
made with a specially formulated material which couples the strings' vibrations
to the neck and brings out the hidden harmonics and richness in every note. It
is based on the highly resonant TUSQ man made ivory, but is impregnated with
PTFE to improve the tuning performance of the guitar.
Please note that we buy these items in bulk, so they do not come in the
same factory packaging as single sets.
Specification:
|
Measure
|
Length
|
Width
|
Height
|
E to E
|
|
inches
|
1.700"
|
0.130"
|
0.213"
|
1.390"
|
|
mm
|
43.18
|
3.30
|
5.41
|
35.31
|
